High performance descaler for industry
Lime, corrosion products, dust, grease and deposits of dirt are quickly and reliably dissolved. Highly effective inhibitors safely prevent the corrosion of metallic areas (with the exception of zinc) during the cleaning. Also well suited for the surface cleaning of cement and lime scale residues.
Oxyclean-S is used for the cleaning of cooling / heating circuits, boilers and industrial systems, dirty tiled floors and industrial floors.
Biodegradable subsequent to neutralisation according to OECD guidelines.
How to use
Through spraying, wiping or immersion when diluted with water up to 1:10. Subsequently rinse the cleaned parts and/or areas with undiluted water, and if necessary, treat with a corrosion protection product, e.g. from the FERROTEC range.
Drain off the water in the system up until the amount which cannot be pumped out. Add Oxyclean-S corresponding with the remaining content. The ph-value should be monitored during the cleaning, and continually maintained at pH 1 through the subsequent dosing of Oxyclean-S. The cleaning has finsihed when the pH value has remained stable for approx. 1 hour without the addition of the product. After this, the cleaning fluid is neutralised in the system with potash lye at pH 7-9 before being drained. In the first rinse water, Hydrotec is added as a flocculant at 1 l/m³ before being recirculated and discharged. A previously determined product from the Hydrotec range should be dosed during the refilling of the system in order to prevent new deposits and/or corrosion from occurring.
We recommend to conduct a preliminary test in a measuring cup prior to neutralisation in the system, to determine whether the flocculation occurs too fast in the system and prevent that from happening.
Available in the following packaging
|6101||Canister of 30 liters or 60 liters
Barrel of 200 liters