Evaporating cutting oil for cutting, lubricating oil for non-cutting, cold metal forming
chlorine-free, slow to evaporate, free of aromatic compounds
Synthetic, non-resinifying ester, in combination with oils that are odourless and free of aromatic componds result in good lubrication characteristics for stamping, pressure-forming and bending work on steel, VA-steel, aluminium, brass and/or zinc-plated sheet steel.
Non-ferrous metals remain stainless and do not discolour.
The sound wetting effect also has a cleaning effect, so that slight soiling of the material is no problem.
Tecut-S evaporates slowly, with an evaporation number of approx. 100.
Thin films evaporate with no residues so that additional cleaning is not required.
How to use
Ready to use, by spraying, dipping/flooding, brushing or rolling.
Viscosity = approx. 2 mm²/s (at 20°C)
Available in the following packaging
|3214||Canister of 30 liters or 60 liters
Barrel of 200 liters