Colourless 2-K-epoxy resin primer and sealant for screed, concrete, sandstone and other mineral surfaces
solvent-free

Deeply penetrates the surface and hardens there through a chemical reaction.
The compressive resistances which are attainable as a result are up to three times higher than in the untreated state.

Tecupox when hardened is resistant to solvents, petroleum, acids, lyes and salts.
When it is used outdoors, the frost/freeze-thaw resistance is considerably increased.

Your advantage / your benefits

  • Easy to apply
  • Solvent-free
  • Resistant to chemicals
  • Enormously increases the level of resiliance
  • Safely reduces abrasion / dust
  • Prevents damage due to lubricants
  • Saves on unwanted costs

How to use

The surfaces to be treated must be free of oil, grease and dust. Remnants of paint are to be removed in advance.
Open the upper container seal and pierce its base through the opening with a sharp object.
Leave to completely flow out. Remove the hardener container.
Carefully mix together the full contents of the lower container using a stirrer (including the outer rim).
Shake the mixture onto the surface and distribute it equally with a roller, a brush or a slide.
Use approx. 200 g/m². Application time subsequent to the mixing: approx. 40 min.
Waiting time prior to the next coating: 1-3 hours. The primer coat should be slightly adhesive.

Example of use

Available in the following packaging

8201 10 kg bucket