Tecupox-Color

Tecupox-Color2018-09-20T19:48:02+00:00

Coloured 2-K-epoxy resin sealant for screed, concrete, sandstone and other mineral surfaces
solvent-free

The sealant hardens as a result of a chemical reaction and resultingly becomes very shock-, impact-, abrasion- and scratch resistant.

Tecupox-Color when hardened is resistant to solvents, petroleum, acids, lyes and salts.
The standard colour is similar to RAL 7023 (concrete grey).
Other RAL-similar colour shades can be supplied on request.

Your advantage / your benefits

  • Easy to apply
  • Solvent-free
  • Very abrasion resistant
  • Coloured
  • Saves on unwanted costs
  • Reduces the cleaning requirements by a long way
  • Allows for the configuration of coloured areas

How to use

Prior to sealing with Tecupox-Colour, the provision of a primer with Tecupox is necessary.
Remove the upper container and stir the contents of the lower container.
Next, put the upper container back in place.
Open the upper container seal and pierce the base through the opening with a sharp object. Leave to completely flow out.
Remove the hardener container. Carefully mix together the full contents of the lower container using a stirrer (including the outer rim).
Shake the mixture onto the surface and distribute it equally with a roller, a brush or a slide. Use approx. 200 g/m².
Only complete a possible second coat after 8 hours.
Application time subsequent to the mixing: approx. 40 minutes.
Hardening time: 30-40 hours at 20°C.

Example of use

Available in the following packaging

8203 11,5 kg bucket