A mixture between a corrosion protection oil for a medium protection duration and a cold degreaser
chlorine, nitrite and barium free
The normal mixture between a corrosion protection oil on the basis of modern, selected additives with a medium protection duration for interim hall storage and a cold degreaser is 20: 80, but it can also be manufactured in every other mixing ration.
The thin, oily protective film that remains is stable to aging, does not resinify and has a very high blocking effect against steams, gases and condensation. Through the low level of viscosity, inaccessible areas are also moistened and protected. The protective film fulfils the requirements of corrosion protection according to the VW regulation: PV 52.01 for all metals.
The corrosion protection additives which it contains correspond with MIL-C-3150 C.
This product is used to protect tools, machine components, sheeting, pipes and half finished products for interim storage.
Korrosionsschutzmischung-O can easily be removed again with Tecusol…, Teculan-100 / -200 or Ferrolan-S for example.
How to use
Ready to use, by immersion, flooding, rolling and spraying.
Layer-weight from the immersion procedure: approx. 1 g/m².
When used in a small components cleaner, the cleaning and the corrosion protection is almost achieved at the same time.
Available in the following packaging
|5302||Canister of 30 liters or 60 liters
Barrel of 200 liters