A mixture between a wax-type corrosion protection for an extremely high protection duration and a cold degreaser
chlorine, nitrite and barium free

The normal mixture between a corrosion protection oil on the basis of modern, selected additives with a high protection duration for covered interim storage and a cold degreaser is 20: 80, but it can also be manufactured in every other mixing ration.

The thin, protective film which is like a soft wax that remains is stable to aging, does not tear/resinify and has a very high blocking effect against steams, gases, condensation and salts. Through the low level of viscosity, inaccessible areas are also moistened and protected.
Water is infiltrated (dewatering effect) through special additives e.g. by cutting with water-miscible cooling lubricants.

The protective film fulfils the requirements of corrosion protection according to the VW regulation: PV 52.01 for all metals.

This product is used to protect ground and polished tools, machine components, injection moulding casts, sheeting etc.

Korrosionsschutzmischung-W can easily be removed again with Tecusol…, Teculan-100 / -200 or Ferrolan-S for example.

Your advantage / your benefits

  • Easy to use
  • Free of harmful substances
  • Extremely tear-resistant and touch-dry
  • Prevents complaints
  • Saves expensive post-processing costs
  • Corresponds with the VW regulation PV52.02: – easy to remove –
  • Improves safety enormously

How to use

Ready to use, by immersion, flooding, rolling and spraying.
Layer-weight from the immersion procedure: approx. 2-3 g/m².

Tip

When used in a small components cleaner, the cleaning and the corrosion protection is almost achieved at the same time.

Available in the following packaging

5101 Canister of 30 liters or 60 liters
Barrel of 200 liters